引用本文:刘昌杰,段 斌,张潇丹.基于BPNN-NCT的风电机组主轴承异常辨识方法[J].电力系统保护与控制,2022,50(14):114-122.
LIU Changjie,DUAN Bin,ZHANG Xiaodan.An abnormal identification method for the main bearing of wind turbines based on BPNN-NCT[J].Power System Protection and Control,2022,50(14):114-122
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 5588次   下载 1132 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于BPNN-NCT的风电机组主轴承异常辨识方法
刘昌杰,段 斌,张潇丹
(湘潭大学自动化与电子信息学院,湖南 湘潭 411105)
摘要:
风电机组主轴承作为传动系统的重要组成部件,其异常辨识精度受风速波动的影响较大。针对该问题,提出了一种基于BPNN-NCT的风电机组主轴承异常辨识方法。首先,利用相关系数法确定了与主轴承状态相关的参数作为模型的输入,并基于反向传播神经网络(BPNN)建立了以主轴承温度为状态参数的状态参数预测模型。然后,基于非中心t(NCT)分布刻画了不同风速波动区间下状态参数预测残差的分布特性,并在此基础上提出了计及风速波动影响的风电机组主轴承异常状态量化指标。最后,以某风电场的2 MW直驱风力发电机组为例,验证了所提方法的有效性和准确性。
关键词:  主轴承  状态参数  风速波动  预测残差  异常辨识
DOI:DOI: 10.19783/j.cnki.pspc.211178
分类号:
基金项目:国家自然科学基金项目资助(61379063);湖南省自然科学基金项目资助(2020JJ6034)
An abnormal identification method for the main bearing of wind turbines based on BPNN-NCT
LIU Changjie, DUAN Bin, ZHANG Xiaodan
(School of Automation and Electronic Information, Xiangtan University, Xiangtan 411105, China)
Abstract:
The main bearing of wind turbines is an important part of the transmission system, and its anomaly identification accuracy is greatly affected by wind speed fluctuations. To solve this problem, an abnormal identification method for the main bearing of wind turbines based on BPNN-NCT is proposed. First, the correlation coefficient method is used to determine the parameters related to the main bearing state as the input of the model, and a state parameter prediction model with the main bearing temperature as the state parameter is established based on a back propagation neural network (BPNN). Then a non-central t (NCT) distribution is used to describe the distribution characteristics of the state parameter prediction residuals under different wind speed fluctuation intervals. Then a quantitative index of the abnormal state of the main bearing considering the influence of wind speed fluctuations is proposed. Finally, a 2 MW direct-drive wind turbine of a wind farm is taken as an example to verify the accuracy and effectiveness of the proposed method. This work is supported by the National Natural Science Foundation of China (No. 61379063).
Key words:  main bearing  state parameter  wind speed fluctuations  prediction residual  anomaly identification
  • 1
X关闭
  • 1
X关闭