| 引用本文: | 任志航,邓茂军,王 磊,等.基于间隔功能动态部署的智慧变电站集群测控装置研制[J].电力系统保护与控制,2021,49(20):167-173. |
| REN Zhihang,DENG Maoju,WANG Lei,et al.Development of a smart substation cluster measurement and control device based on interval function dynamic deployment[J].Power System Protection and Control,2021,49(20):167-173 |
|
| 摘要: |
| 智慧变电站集群测控装置采用通用的软硬件平台和过程总线技术，基于IEC 61850标准，集成智慧变电站多个间隔的测控功能。采用即插即用的思想，面向间隔设计，将实体测控装置虚拟化，间隔功能动态集成、灵活部署，适应智慧变电站的不同应用场景，满足改扩建便利性要求。通过配置“单间隔实体测控装置+集群测控装置”，集群测控装置中各虚拟测控单元与单间隔实体测控装置一一对应，实体测控装置故障后自动切换到集群测控装置中对应的虚拟测控单元，实现了智慧变电站测控功能的集中式后备。试验验证和工程应用表明，集群测控装置缩短了设备故障导致测控功能失效的时间，提升了智慧变电站自动化系统的可靠性。 |
| 关键词: 智慧变电站 集群测控 动态部署 虚拟化 冗余备用 |
| DOI：DOI:?10.19783/j.cnki.pspc.201652 |
| 分类号: |
| 基金项目:国家电网公司科技项目资助(5100-201946264A- 0-0-00)；中原科技创新领军人才计划资助(204200510007) |
|
| Development of a smart substation cluster measurement and control device based on interval function dynamic deployment |
|
REN Zhihang1, DENG Maojun1, WANG Lei2, FAN Zhanfeng1, NI Chuankun1, YU Gaowang1, LI Xu1
|
|
(1. XJ Electric Co., Ltd., Xuchang 461000, China; 2. State Grid Henan Dancheng
Power Supply Company, Dancheng 477100, China)
|
| Abstract: |
| The smart substation cluster measurement and control device adopts a common software and hardware platform and process bus technology, based on IEC 61850 standard, and integrates the multiple interval measurement and control functions of the smart substation. Adopting the plug-and-play concept, the bay design is oriented, the physical measurement and control device is virtualized, the bay function is dynamically integrated and deployed flexibly, adapting to different application scenarios of smart substations, and meeting the convenience requirements of reconstruction and expansion. By configuring "single bay physical measurement and control device + cluster measurement and control device", each virtual measurement and control unit in the device corresponds to the single bay physical measurement and control device. After the physical measurement and control device fails, it will automatically switch to the corresponding virtual measurement and control unit in the cluster measurement and control device. The centralized backup of the measurement and control function of the smart substation is realized. Test verification and engineering applications show that the cluster measurement and control device shortens the time that equipment failure causes the measurement and control function to fail, and improves the reliability of the smart substation automation system.
This work is supported by the Science and Technology Project of State Grid Corporation of China (No. 5100-201946264A-0-0-00) and the Central Plains Science and Technology Innovation Leading Talents Program of Henan Province (No. 204200510007). |
| Key words: smart substation cluster measurement and control dynamic deployment virtualization redundant backup |
