引用本文:李涛,苗晓鹏,李晓波.基于恒定零序电压幅值的消弧线圈调谐新方法[J].电力系统保护与控制,2014,42(9):86-90.
LI Tao,MIAO Xiao-peng,LI Xiao-bo.A new tuning method of arc suppression coil based on the constant zero-sequence voltage amplitude[J].Power System Protection and Control,2014,42(9):86-90
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 5251次   下载 3152 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于恒定零序电压幅值的消弧线圈调谐新方法
李涛1, 苗晓鹏2, 李晓波2
1.唐山供电公司, 河北 唐山 063000;2.中国矿业大学信息与电气工程学院,江苏 徐州 221008
摘要:
为了改善消弧线圈补偿的补偿效果,提出了一种基于恒定零序电压幅值的消弧线圈调谐新法。该方法通过在配电网中性点增加消弧线圈及电阻,更换电阻之后,调节消弧线圈电感值,同时观察和测量中性点偏移电压有效值的大小,来配合消弧线圈的进一步调节。当改变电阻前后中性点偏移电压有效值相同时,联立方程,可以精确地求出配电网对地电容总和 与对地电阻总和 ,从而确定消弧线圈全补偿时的电感值 。通过Matlab仿真和理论计算,验证了该方法能够取得比较精确的补偿效果。该方法具有操作简单,测量精度高,补偿效果好等优点,可以应用于消弧线圈调谐领域。
关键词:  幅值  消弧线圈调谐  电感值  中性点偏移电压  测量效果
DOI:10.7667/j.issn.1674-3415.2014.09.014
分类号:
基金项目:国家自然科学基金(51107143)
A new tuning method of arc suppression coil based on the constant zero-sequence voltage amplitude
LI Tao1, MIAO Xiao-peng2, LI Xiao-bo2
1.Tangshan Power Supply Company, Tangshan 063000, China;2.School of Information and Electrical Engineering, China University of Mining and Technology, Xuzhou 221008, China
Abstract:
In order to improve the compensation effect of the arc suppression coil, a new tuning method of arc suppression coil based on the constant zero-sequence voltage amplitude is proposed. In this method, the arc suppression coil and resistor are added in the distribution network neutral point. After replacing the resistor, it adjusts the arc suppression coil inductance value, while observes and measures the size of the neutral point offset voltage rms, to coordinate the further adjustment of the arc suppression coil. When the neutral point offset voltage rms is identical before and after replacing the resistor, simultaneous equations, the sum of the capacitance to ground and the sum of the resistance to ground in the distribution network can be accurately obtained, thus to determine the value of arc suppression coil fully compensated inductor L0. Matlab simulation and theoretical calculation verify that the method can obtain a more precise compensation effect. This method has the advantages of simple operation, high accuracy, good compensation effect, so it can be applied to the areas of arc suppression coil tuning.
Key words:  amplitude  arc suppression coil tuning  inductance value  neutral point offset voltage  effect of measure
  • 1
X关闭
  • 1
X关闭