引用本文:姜杰,郭威,黄文兴,等.基于故障数据的线路分布参数时域辨识方法[J].电力系统保护与控制,2013,41(14):7-12.
JIANG Jie,GUO Wei,HUANG Wen-xing,et al.Distributed parameter time domain identification method of transmission lines based on fault records[J].Power System Protection and Control,2013,41(14):7-12
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4659次   下载 199 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于故障数据的线路分布参数时域辨识方法
姜杰1, 郭威1, 黄文兴2, 康丽3, 萧星华2, 孙小江4
1.输配电装备及系统安全与新技术国家重点实验室(重庆大学),重庆 400030;2.广东电网公司东莞供电局,广东 东莞 523000;3.东莞理工学院电子工程学院,广东 东莞523808;4.重庆新世杰电气股份有限公司,重庆 400030
摘要:
针对目前基于故障数据的频域辨识方法难以精确辨识线路分布参数的问题,基于线路分布参数时域模型,提出了一种更精确的分布参数辨识方法。该方法利用线路两端采集的故障电压电流信号,在时域内通过最小二乘搜索法辨识得到线路参数,避免了频域法向量转换导致的误差。并采用瞬时对称分量法提取序分量,实现时域内分别对正序和零序参数的辨识;采用LOWESS方法平滑故障信号中的噪声,以提高算法的抗干扰性。仿真算例的结果表明,所提出的方法能够准确辨识线路的分布参数,并且对各种故障条件均具有良好的适应性。
关键词:  参数辨识  分布参数  瞬时对称分量法  故障数据  LOWESS
DOI:10.7667/j.issn.1674-3415.2013.14.002
分类号:
基金项目:东莞市高等院校、科研机构科技计划项目 (2012108102011);专利号:201210458824.4
Distributed parameter time domain identification method of transmission lines based on fault records
JIANG Jie,GUO Wei,HUANG Wen-xing,et al
Abstract:
The existing frequency domain identification methods using fault records can not identify the transmission lines distributed parameters accurately, so this paper proposes a more accurate method of distributed parameter identification based on time-domain model. The method uses the fault voltages and currents measured at both terminals of the lines and calculates the line parameters by the least squares method in time-domain to avoid the error caused by vector transformation using frequency-domain method. It uses instantaneous symmetrical component method extracting sequence component to identify positive-sequence and zero-sequence parameters respectively in time-domain and uses LOWESS method smoothing fault signal noise to enhance the anti-interference performance of algorithm. The simulation results show that the proposed method can effectively identify the distribution parameters, and has high accuracy in a variety of fault conditions.
Key words:  parameter identification  distributed parameter  instantaneous symmetrical component  fault record  LOWESS
  • 1
X关闭
  • 1
X关闭